CrystalSky (7.85" High Brightness)

  • Outdoor monitor screen
  • Clearly visible in sunlight
  • Works seamlessly with the DJI GO/DJI GO 4 app
  • Four times brighter than mobile devices
  • Includes Sunlight Readability Enhancement mode
  • Provides smooth, real-time video with minimal latency
  • Requires a Remote Controller Mounting Bracket (when attaching to remotes other than the Cendence)
  • $699.00
  • Weight
    1.4800 lbs
  • SKU


The CrystalSky monitor uses optimized video decoding to decode video in real-time. Due to limitations in software access on smartphones and tablets, video decoding in other smart devices is less than ideal. When used to view photos or videos transmitted by the camera, problems can occur including video jitter, long latency and more. The CrystalSky monitor’s optimized decoder provides smooth, real-time video with minimal latency.


A newly designed system removes unnecessary Android apps and services and is resistant to viruses and junk software. This ensures that the CrystalSky monitor is able to offer optimum performance at all times. Its embedded DJI GO/DJI GO 4 app provides full access to all DJI GO/DJI GO 4 features including aircraft parameter adjustment, camera control, footage management, and playback. Using offline maps, maps can be kept available even if going out of Wi-Fi reach.


A two cell 4920 mAh secondary external battery gives the CrystalSky monitor a longer operating time than comparable mobile devices. It supports quick charge, and controls its discharge rate well even in low temperatures. Used with the 7.85" and 5.5" screens, it can achieve a maximum operation time of 4-5 hours and 5-6 hours respectively.


Equipped with dual Micro SD Card slots, the CrystalSky monitor’s storage can be extended, or footage recorded on a Micro SD Card can be played back directly on the monitor. It can also be used for footage backups. Using editors built in DJI GO/DJI GO 4, high-quality edits can be made quickly and instantly shared to social media.

The CrystalSky monitor supports H.264 and H.265 video decoding, allowing it to play back these files at 30 fps and 60 fps respectively. These videos can also be output through its HDMI port.


The CrystalSky monitor’s HDMI port allows up to 4K video to be output to FPV goggles and other display devices. Built-in dual band Wi-Fi means it can connect to Wi-Fi networks and Wi-Fi hotspots from mobile devices, and it is also compatible with 4G dongles and USB storage through its USB-A port.

When connected to the internet, the CrystalSky monitor gets easy access to system upgrades, livestreaming, photo or video sharing, data synchronization and more. File sizes are optimized as much as possible to minimize mobile data demands.

Onboard Micro USB and USB-C ports make it convenient to connect the CrystalSky monitor with a remote controller or other devices.


Most smart devices are designed to operate in common temperature ranges. The CrystalSky monitor's external battery has been designed for more extreme temperatures. It is able to operate in as low as -4°F (-20°C) and, with its internal cooling system, functions normally in temperatures as high as 104°F (40°C).


The CrystalSky monitor can quickly connect to the Inspire series, Phantom 4 series, Phantom 3 series (Phantom 3 Professional, Phantom 3 Advanced), Matrice series, and Osmo series (except the Osmo Mobile) over Wi-Fi or via a remote controller USB port, depending on your specific product.* Also, CrystalSky easily attaches to the Cendence remote controller without an additional mounting bracket.


7.85" High Brightness:

CrystalSky Monitor ×1

Intelligent Battery ×2

Intelligent Battery Charging Hub ×1

  • Manufacturer
  • MFR

Compatible Platforms:

Mavic Pro

Phantom 4 Series

Phantom 3 Series

Inspire Series



Osmo Pro

Osmo RAW

Osmo Pro/RAW - Wired Video Adapter

CrystalSky - Osmo Pro/RAW Mounting Bracket

Cendence Remote Controller (requires no mounting bracket)

CrystalSky - Remote Controller Mounting Bracket

CrystalSky Mavic/Spark Remote Controller Mounting Bracket


Compatible Battery Chargers:

Inspire 2 Battery Charger (IN2C180)

Inspire 2 Battery Charger (ADE018)

Inspire 2 Car Charger (C6S90-2)

Inspire 1 100W Battery Charger (A14-100P1A)

Inspire 1 180W Battery Charger (ADE018)

Inspire 1 Car Charger (C6S90)

Phantom 4 Series Battery Charger (PH4C100)

Phantom 4 Series 160W Battery Charger (PH4C160)

Phantom 4 Car Charger (C6S90)

Phantom 3 Professional Battery Charger (ADE019)

Phantom 3 Car Charger (C4S90)

*Phantom 3 57W Battery Charger (A14-057N1A)

*Osmo 57W Battery Charger (A14-057N1A)


*The 57W battery charger does not supply enough power to charge batteries and other devices connected to the USB port simultaneously. DO NOT use the USB port to charge another device when charging batteries.


Display                                 Multi-touch display with IPS technology

Resolution                            2048X1536

Brightness                           1000 cd/m²

Operating System                Android

App                                      DJI GO, DJI GO 4, DJI Pilot

Memory                                ROM 64GB+RAM 4GB

Connectors                          HDMI,MicroSD card slots,Micro-USB and USB-C

Connectivity                         WIFI:2.4G,5.2G&5.8G 802.11b、802.11g、802.11n(HT20)、802.11a

                                             4G dongle support

GPS                                      GPS/GLONASS

Gyroscope                            Support

Compass                              Support

Speaker                                Support

Brightness Sensors               Support

Mic                                        Support

Built-In Battery                     980 mAh, 3.7V

External Battery                   4920 mAh,7.6V(detachable)

Operation Temperature       -20℃ to 40℃ (-4℉ to 104℉)

4K Video decoding               H.264 4k 30fps / H.265 4k 60fps



Without Battery                  208.6*147.8*17mm

With Battery                       208.6*147.8*34.75mm

Outer Battery                     90*45*26mm